Rheem Heavy Duty 120 gal. 208-Volt 36kw 3-Phase Commercial Electric Surface Thermostat Tank Water Heater

Rheem Commercial Heavy-Duty Electric Water Heaters are suitable for general commercial hot water applications and are also ideal for point-of-use installations. A single unit can be used as a booster heater to satisfy the hot water requirements of commercial dishwashers. A single temperature storage unit, when installed with a mixing valve, will supply two temperatures in food service establishments.|System sentinel diagnostics identifies a non-operating element|Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design|Minimum distance to combustibles is 0 in. from jacket and 18 in. from access door|Control box is located at the front of unit for easy wiring during installation with multiple knockout holes to accommodate a variety of conduit sizes|Factory wired 3-phase, approved for field conversion to single phase|Screw-in stainless steel elements that resist burn out and corrosion|Thick foam insulation for minimal standby heat loss|2-anode rods are installed to ensure long life and corrosion resistance|Full port, full flow brass drain valve reduces time to drain and service tank|Factory installed temperature and pressure relief valve