Pro Series Pumps 1/2 HP Cast Iron Submersible Sump/Effluent Pump

The S2050-NS 1/2 HP All Cast Iron Sump / Effluent Pump is built with premium construction and engineered to be a workhorse for the professional contractor. It is designed for peak performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It has a cast iron vortex impeller which can pass 1/2 in. solids. The S2050 sump / effluent pump pushes a massive 3600 GPH at 10 ft. while only pulling 5.5 Amps saving on the electric bill. It is thermally protected, has stainless steel fasteners, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. You can feel safe that Pro Series Pumps Is Pumping for You!|4,300 GPH (71 GPM) at 0 ft. lift; 3,600 GPH (60 GPM) at 10 ft. lift|Heavy duty all cast iron sump / effluent pump|1/2 HP Energy efficient permanent split capacitor (PSC) motor|S2050-NS is pump only, no switch included; See below for recommended options|Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor|Upper and lower ball bearings for increased efficiency and ultra-quiet operation|Thermally protected PSC motor|Cast iron vortex impeller can pass 1/2 in. solids|Built in air bleed hole to help prevent air lock|1-1/2 in. Discharge|10 ft. Grounded power cord|Recommended Sump Dual Float Options: DFC2 (best), Item # 110607; DFC1.5 (Better), Item # 3553971; DFC1 (Good), Item # 134658|Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659|4 Year limited warranty when purchased from and installed by a contractor, otherwise 3 year warranty