PolyPro 3 in. in Diameter Polypropylene Black Single Wall Plate in for Venting Water Heaters

Use to trim wall penetration. Painted black metal with gasket. PolyPro and PVC/CPVC PVC pipes are commonly used for venting water heaters, condensing boilers and warm air furnaces, yet PVC was never designed for such use. An environmentally safe and engineered alternative is PolyPro, for condensing gas appliances. Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals. PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over fifteen years. Polypropylene has a higher operating temperature limit of 230 degree F/110 degree C (PVC is 149 degree F/65 degree C max and CPVC is 194 degree F/90 degree C). PolyPro is engineered with a corrosion-free, condensation management system.|PolyPro is a polypropylene vent pipe for use with ANSI category II and IV gas-burning appliances, including high efficiency water heaters, condensing boilers and warm air furnaces|0 in. clearance to combustibles for exhaust temperatures up to 194 degree F / 90 degree C and 0 in. clearance for vertical installations up to exhaust temperatures of 230 degree F / 110 degree C and 1/4 in. / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230 degree F / 110 degree C|Check with appliance manufacturer, Intertek / ETL Listed to ULC-S636 Listed as a class IIA, IIB, and IIC vent system|PolyPro is an environmentally safe and engineered alternative, for condensing gas appliances|Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals|PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over 20 years|PolyPro is engineered with a corrosion-free, condensation management system|Rigid pipe constructed of 2.2 mm (minimum) thick PolyPro|Easy to install lightweight, assembles quickly, can be disassembled for inspection or cut to desired length|Gasketed joint system, no adhesives nor primers required, no curing times and no special training no mess