MEC INDUSTRIAL HIGH PRESSURE REGULATOR WITH 1/2 IN. ORIFICE, 1 IN. FNPT INLET AND OUTLET, 5-20 PSI*

| The MEGR-1627 Series commercial/industrial regulator is a large capacity, high pressure unit for use in conjunction with MEGR-CS1200 or MEGR-S1202 Series regulators. It can also be used on final-stage (PSI to PSI) service. The diaphragm case and/or regulator body on the MEGR-1627 Series an be rotated in any of four positions to allow installation in locations with limited space. Available with a monitor or integral relief valve. The MEGR-1627 Series is perfectly suited for jurisdictional systems, grain dryers, direct fired vaporizers or other high capacity service applications. | Adjustable/PSI Type | 3/8” or 1/2” Orifice Diameter | Aluminum Orifice Material | 250 PSI Max. Inlet Pressure | Steel Regulator Spring | Stainless Steel Stem Guide/Disk Holder | Steel Valve Stem | Gray Powder Coat Exterior Finish | Fabric Reinforced Nitrile (NBR) Diaphragm | Cast Aluminum/Iron Bonnet Cap & Housing / Body Material^*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES|Adjustable/PSI Type|3/8 or 1/2 Orifice Diameter|Aluminum Orifice Material|250 PSI Max. Inlet Pressure|Steel Regulator Spring|Stainless Steel Stem Guide/Disk Holder|Steel Valve Stem|Gray Powder Coat Exterior Finish|Fabric Reinforced Nitrile (NBR) Diaphragm|Cast Aluminum/Iron Bonnet Cap & Housing / Body Material