SharkBite 1/2 in. Push-to-Connect Brass Slip Tee Fitting

SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 inches of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.|Push-to-connect fittings are ideal for installation in tight spaces|Rated to 200 degrees Fahrenheit and 200 PSI|Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)|Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry|Low-lead DZR corrosion-resistant brass body|Code approved, IAPMO listed, for details see Specifications|25-Year warranty when used with CPVC & copper pipe|Certified as a manufactured joint and for underground and behind-the-wall applications without access panels|Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61|Meets all UPC, IPC and cUPC requirements|Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)|Rated to 200 degree F and 200 psi|1/2 in. pipe insertion depth equal to 15/16 in.