Rust-Oleum 1 gal. 9100 System Part B Clear Oil Based Interior Immersion Activator Paint

The Rust-Oleum High Performance 9100 System Part B Immersion Activator is a versatile 2-part epoxy coating that quickly creates a tough, durable, protective surface. In just one coat 9100 System is equal to multiple coats of competitive epoxy. This coating is ideal for interior or exterior steel.|Must combine 9100 Part B Immersion Activator with 9100 Part A Base item# 314200277(White) OR item# 313268169 (Marlin Blue) (sold separately) for use in swimming pools, slides, fountains and spas|Covers approximately 350 sq. ft. when mixed 1:1 with part B Immersion Activator gallon|Dry to touch in 6-8 hours, recoat after 16 hours|Allow 7 days cure after application of the second coat before water immersion|For fresh or salt water immersion of steel or concrete where water temps do not exceed 125 degree F (52 degree C)|Stain and chemical resistant, durable lasts up to 8-years between recoats|Flat finish provides a non-reflective, non-glare appearance|Spray, roll or brush on|Do not use over chlorinated rubber, synthetic rubber, vinyl or acrylic substrates|Clean up with 160 thinner or xylene