Roberts 7350 1 Gal. Universal Flooring Adhesive

ROBERTS 7350 Universal Flooring Adhesive is a high quality, high solids formulation designed specifically for installing luxury vinyl tiles and planks. This pressure sensitive adhesive has tremendous bond and shear strengths, making it ideal for use with large format vinyl tiles. This formulation has excellent moisture and plasticizer migration resistance for demanding commercial installations. ROBERTS 7350 is also used to adhere carpet tiles, specialty vinyl flooring underlayment, vinyl composition tile (VCT), and homogeneous and heterogeneous sheet flooring. Dry time may vary with temperature, humidity and porosity of substrate.|Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile, rigid core and wood/stone plastic composite/waterproof core flooring|Bonds with properly prepared concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85 degrees Fahrenheit|For environmentally-controlled indoor use only|Rebondable, pressure sensitive formulation with an aggressive bond|Moisture control adhesive - up to 10 lbs. MVER and 90% RH|Up to 20 minutes open time and up to 40 minutes working time for permanent installations (wet-set method) on porous substrates only|Up to 45 minutes tack time and 12 to 14 hours working time for releasable installations|Approximately 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel and 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel|Approximately 220 to 260 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/32 in. x 1/32 in. U-notch trowel and 300 sq. ft. per gallon coverage when applied with a 3/8 in. medium nap roller|Excellent resistance to plasticizer migration and moisture helps maintain the true performance of the adhesive|Enviro-friendly, solvent-free and LEED compliant; VOC 11 g/L|Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives|CRI Green Label Plus certified - GLP Number 42613|Non-flammable, NFPA Class A and UBC Class 1 fire resistance|15 year moisture control, 15 year direct bond, 7 year double bond limited warranty|Ensure adequate ventilation during flooring installation|Traffic - Heavy Commercial|Fresh adhesive is easily cleaned with warm, soapy water