ROBERTS 4 Gal. Wood and Bamboo Flooring Urethane Adhesive

Roberts R1509 is 100% solids moisture cure urethane adhesive glue formulated for the installation of solid, engineered and parquet wood flooring. It is also recommended for bamboo flooring. Roberts R1509 is a solvent free adhesive which meets the Low VOC requirements of the south coast air quality management district.|For bonding solid wood flooring, bamboo, flat milled shorts, finger/block parquet (plain back), engineered and acrylic impregnated flooring recommended for glue-down applications, cork underlayment and plywood|Moisture cure urethane wood flooring adhesive that offers a tenacious bond to all types of wood and bamboo flooring|Works with all types of wood for glue down applications|Open time: up to 80 minutes, working time: up to 120 minutes, cure time: 8-10 hours|Environmentally friendly formula that may contribute 1 LEED point for low-emitting material-adhesive and sealant (IEQ Credit 4.1), zero VOC (calculated), 0% VOC by weight|Covers approximately 45 to 55 sq. ft. per gal. when installing engineered wood flooring that is equal to or less than 1/2 in. thick using a 1/4 in. x 1/4 in. x 1/4 in. v-notch trowel|Covers approximately 30 to 40 sq. ft. per gal. when installing solid wood and bamboo that is equal to or less than 3/4 in. thick when using a 1/4 in. x 1/4 in. x 1/4 in. square notch trowel|Covers approximately 30 to 40 sq. ft. per gal. when installing engineered wood flooring that is greater than 1/2 in. thick when using a 1/4 in. x 1/4 in. x 1/4 in. square notch trowel|Superb flexibility to expand and contract with natural movement of wood flooring|Does not contain any water, 100% solids formulation|Incredible bond strength|Use Roberts R5505 for clean-up on floor and tools