MSI Three Rivers Gold 12 in. x 12 in. Gauged Slate Floor and Wall Tile (10 sq. ft. / case)

This MSI 12 in. x 12 in. Three Rivers Gold Slate Floor and Wall Tile offers a bold combination of earthy tones that will add a splash of rustic styling to commercial and residential spaces. This tile is constructed from durable, vitreous slate material, comes in an unglazed, textured finish and incorporates random variations in tone. This tile is suitable for installation on floors and walls. Note: Inspect all tiles before installation. Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc. It is recommended to blend tiles from different boxes when installing. Natural stones may be characterized by dry seams and pits that are often filled. The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure. All natural stone products should be sealed with a penetrating sealer. After installation, vendor disclaims any liabilities.|10 square feet, 10 pieces per case. Case weight is 60 lb.|Grade 1, first-quality natural stone slate tile for floor, wall and countertop use|12 in. width x 12 in. length x 3/8 in. thick|Natural finish with a low sheen and random variation in tone|P.E.I. Rating is not applicable for natural stone|Vitreous flooring has water absorption of more than 0.5% but less than 3%|C.O.F. 0.80 and above is recommended for commercial applications to meet or exceed ADA (Americans with Disabilities Act) Guidelines. Highly Skid Resistant|Not frost resistant|Residential and commercial use|Don't forget your coordinating trim pieces, grout, backerboard, thinset, and installation tools|Recommended you purchase a minimum of 10% overage to account for design cuts and patterns|GREENGUARD Indoor Air Quality Certified and GREENGUARD Children and Schools Certified product|A 1-year limited warranty is provided on flooring and surfacing products manufactured or distributed by MSI within the limitations explicitly outlined in the warranty statement